IBM Aptiva Handbook page 93

5.
Pull the diskette drive from the mounting tray to
remove it.
6.
Reverse the procedure to install a new drive.
Removing the CD-ROM drive
To replace the CD-ROM:
1.
Disconnect the power, sound and signal cables from
the CD-ROM.
2.
Remove the four screws (two on each side) that hold
the CD-ROM drive to the chassis.
3.
Open the door on the front of the computer.
4.
Slide the CD-ROM drive forward through the front
opening and remove it.
5.
Reverse the procedure to install a new drive.
Removing and adding drives 8-9