IBM Aptiva Handbook page 108

Step 1 Are the power indicator lights on the system unit and monitor lit?
Note: The locations of the power indicator lights may be slightly different from those shown in these pictures.
No
10-2 Chapter 10: Diagnosing and recovering from problems
Power is reaching the system unit and monitor. Go to Step 2.
Yes
a. Press the power button on the system unit and monitor to make sure they are turned on.
b. Make sure your system unit and monitor cables are correctly and securely connected. Make
sure the system unit and monitor power cords are plugged into electrical outlets. The Setup
poster shows how the cables and cords should be connected.
c. Make sure the electrical outlets you are using are not controlled by a wall or dimmer switch.
d. If you are using a multiple outlet device (for example, a power surge protector or power strip),
make sure it is plugged in and turned on.
If the problem continues, refer to the "Quick problem solving chart" on page 10-6.