IBM Aptiva Handbook page 125

Table 4: Error codes and messages (Continued)
Error codes Error messages
1783 Secondary slave hard disk fail
8602 PS/2 Mouse error OR no PS/2
mouse present
If any of the errors persist after performing the listed corrective actions, see "Chapter 2: HelpWare support and
Note:
services" on page 2-1 for information on obtaining service.
Corrective actions
1.Load the default settings in Setup.
2.Check the IDE drive jumper.
3.Check the power to the IDE drive.
4.Check the IDE cable/connection.
5.Check the IDE drive.
1.Determine if the mouse is connected properly and is
defined correctly in BIOS Setup.
Error codes and messages 10-19