IBM Aptiva Handbook page 66

%RRW 8S 1XP/RFN 6WDWXV
Determines the default state of the numeric keypad. By
default, the system boots up with NumLock on.
On The numeric keypad provides numeric functions.
The numeric keypad provides arrow-key, Home, PgUp,
Off
PgDn, End, Insert, and Delete functions.
7\SHPDWLF 5DWH 6HWWLQJ
This setting determines whether or not the typematic
(repeat) function is enabled. If the typematic function is
enabled and a key is held down, the key will repeat after a
brief delay. If the typematic function is disabled, the key will
not repeat when held down.
Enabled Enable typematic rate (repeat)
Disabled Disable typematic rate (no repeat)
7\SHPDWLF 5DWH &KDUV6HF
When the typematic rate is enabled, you can select the rate
at which the keys are repeated.
6 6 characters per second
8 8 characters per second
10 10 characters per second
12 12 characters per second
15 15 characters per second
20 20 characters per second
24 24 characters per second
30 30 characters per second
7\SHPDWLF 'HOD\ 0VHF
6-8 Chapter 6: BIOS Setup configuration
When the typematic rate is enabled, you can select the delay
between when the key was first depressed and when the
acceleration begins.
250 250 msec
500 500 msec
750 750 msec
1000 1000 msec
6HFXULW\ 2SWLRQ
This setting determines the access limitation to the
operating system and Setup, or just Setup.
The operating system will not start and access to Setup
System will be denied if the correct password is not entered at the
prompt.
The operating system will start, but access to Setup will be
Setup denied if the correct password is not entered at the
prompt.
To disable security, select
Configuration/Setup Utility menu and then you will
be asked to enter password. Do not type anything;
Note: just press
Enter
security is disabled, the operating system will start
normally and you can access Setup without a
password.
26 6HOHFW IRU '5$0 !  0%
Use this setting if you are using the IBM OS/2 operating
system and have more than 64MB of system memory
installed.
5HSRUW 1R )'' IRU :LQ 
Password Setting
. This will disable security. Once
at