IBM Aptiva Handbook page 61

:KHQ WKH FRPSXWHU LV RQ
Follow these steps to enter Setup when the computer is on:
1.
Save all open files and close all running applications.
2.
Click on the Start button from your Windows 98
desktop.
3.
Click on the Shut Down...
4.
From the window that appears, click on the option
Restart the computer?
5.
When you see the IBM Aptiva logo and the line
message "Press F1 to enter Setup", press
Setup and display the Configuration/Setup Utility
menu.
You cannot enter Setup after the Power On Self Test
Note:
(POST) is complete.
If you have previously set a power-on password, you
are prompted to type in the password after you press
the F1 key. See "Set Password" on page 6-14 and
"Security Option" on page 6-8 for information on
setting, changing, and removing the password.
option.
, and then click on OK.
F1 to enter
:KHQ WKH FRPSXWHU LV RII
Follow these steps to enter Setup when the computer is off:
1.
Turn on your monitor.
2.
Turn on the system unit.
3.
When you see the IBM Aptiva logo and the line
message "Press TAB to show POST screen, F1 to
enter SETUP", press
Configuration/Setup Utility menu.
If you have previously set a power-on password, you
are prompted to type in the password after you press
the F1 key. See "Set Password" on page 6-14 and
"Security Option" on page 6-8 for information on
setting, changing, and removing the password.
to enter Setup and display the
F1
Entering Setup 6-3