Hmi (Operating Unit); Diagnostics - Siemens Climatix Series Basis Document

Parameter
Parameter
Current language
Logout time
Brightness inbuilt
Contrast inbuilt
Mesage duration Inb
Special settings
Parameter
Parameter
Alarm ackn level
Alarm format
Parameter
Siemens
Building Technologies
13.6

HMI (operating unit)

13.6.1 General
HMI (operator unit) main settings. The suffix inbuilt means that this parameter ap-
plies only to the HMI integrated in the controllers.
Main Index > System overview > All system settings > HMI
Range
– English
– Swedish
– German
– Lang4
– Lang5
3...30 [min]
0...31
0...31
2...15 [s]
13.6.2 HMI special settings
Range
2, 4, 6
---
13.7

Diagnostics

13.7.1 General
This page has the following tasks:
– Information on the controller's required cycle.
– Information on internal software faults.
– General information on the application.
– Enter project-specific information for the application.
Page requires level 4.
Main Index > System overview > All system settings > Diagnostic
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
System settings
Function
Displays current language and options for selec-
tion:
– English.
– Swedish.
– German.
– Do not select! No language implemented.
– Do not select! No language implemented.
Setting time after log in after which an access
level expires after the last operation. Must log in
again after this period.
Brightness of backlit display.
Contrast of backlit display.
Time period during which an error page is dis-
played. This is the case, for example, when a
setpoint is entered that is outside the entry
range.
Requires access level 2:
Go to HMI special settings page.
Function
Sets required access level to acknowledge/reset
alarms.
Modify the display of alarms, e.g. in the HMI.
Should only be done by trained programmers
and only after consulting with the OEM!
145 / 244
CE1P3977en_02
Page 145
01.02.2010