Appendices; Point Tables - Siemens Climatix Series Basis Document

Basis controller
IO Function
Digital outputs
DO1
DO2
DO3
DO4
DO5
DO6
Analog outputs
AO1
AO2
Binary inputs
DI1
DI2
DI3
DI4
DI5
Universal inputs
1
X
X2
Universal inputs / outputs
X3
X4
X5
X6
X7
X8
Notes
230 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 230
BDCX.100820.01GB
Building Technologies
20

Appendices

20.1

Point tables

As a matter of principle, we recommend the following configuration procedure:
During configuration (Configuration 1 and Configuration 2) all required I/Os in
1.
the table must be executed using the following sample.
Clean up the tables prior to starting I/O configuration.
2.
Conduct I/O configuration per the table.
3.
This ensures that
– The plant on the basis controller and the planned extension modules fit.
– It is evident at all times which terminals used for the required inputs and outputs.
Hardware assignment for the basis controller POL683x
– Universals I/Os X1 and X2 can be configured exclusively as inputs (digital,
Ni1000, Pt1000, NTC10K, 0-10V DC).
– Universals I/Os X3 – X8 can be configured as inputs (digital, Ni1000, Pt1000,
NTC10K, 0-10V DC) or outputs 0-10V DC.
Standard application AHU
Appendices
IO type Connection
Digital T6 (Q13,Q14)
Digital T6 (Q23,Q24)
Digital T6 (Q33,Q34)
Digital T6 (Q43,Q44)
Digital T7 (Q53,Q54)
Digital T7 (Q63,Q64)
0...10 V DC T3 (Y1,M)
0...10 V DC T3 (Y2,M)
Digital T4 (D1,M)
Digital T4 (D2,M)
Digital T4 (D3,M)
Digital T4 (D4,M)
Digital T4 (D5,M)
T2 (X1,M)
T2 (X2,M)
T2 (X3,M)
T2 (X4,M)
T2 (X5,M)
T2 (X6,M)
T2 (X7,M)
Comments
CE1P3977en_02
01.02.2010