Detail Pages: Digital Inputs - Siemens Climatix Series Basis Document

Main Index > Unit > Inputs > Element Group > Element > Special infos
Parameter Function
Value comm Present value from communications.
Reliability HW Present reliability of hardware value.
Reliability comm Present reliability of value from communica-
tions.
Disable OffNormal Display OffNormal alarms:
No alarm pending.
Alarm pending.
ToOffNormal Date and time the last off normal alarm
occurred.
ToFault Data and time last fault alarm (Reliability <>
0) occurred.
ToNormal Date and time last alarm was reset.
Communication infos Information on the communication status
for elements.
No error.
Fault.
Main Index > Unit > Inputs > Digital inputs > Element
Parameter Function
Present Value Present input value.
Reliability (Basis Reliability state for hardware.
Controller) Calibration lacking. Controller must be re-
turned to the factory.
Internal fault.
Input not configured.
Reliability (Extension Reliability state for hardware.
Modul POL 955) Calibration lacking. Controller must be re-
turned to the factory; internal fault or input
not configured.
OffNormal Displays OffNormal alarms:
No alarm.
Alarm
Operating hours Number of operating hours for the output.
Operating seconds Number of operating seconds for the out-
(Reset) put. Enter 0 seconds to reset operating
hours to 0.
Last op hours reset Date and time for the last time operating
hours was reset.
Time delay Alarm time delays for off normal alarms.
Special settings Go to special settings page.
Special infos Go to special info page.
Main Index > Unit > Inputs > Digital inputs > Element > Special settings
Parameter Function
Out of service Take input offline for manual entry of state.
The input is in Auto mode.
Input is out of service: The present value
for the hardware has not influence on the
input.
Present value Present value. You can enter a value for
out of service = active.
Siemens
Building Technologies
18.6

Detail pages: Digital inputs

18.6.1 General
18.6.2 Special settings
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
Time scheduler
Value range Unit
Depends on hardware.
Depends on hardware.
Depends on hardware.
Passive
Active
Day of week,
dd.mm.yyyy hh:mm:ss
Day of week,
dd.mm.yyyy hh:mm:ss
Day of week,
dd.mm.yyyy hh:mm:ss
Comm OK
Noch nicht
implementiert.
Value range Unit
Depends on hardware.
OK.
Other
Process Error
Config Error
OK.
Other
Passive
Active
0... [h]
0... [s]
Wday, dd.mm.yyy
hh:mm:ss
0...65535 [s]
Value range Unit
Passive
Active
Text abhängig von der
Hardware.
Standard R S Link
6 Section:
6.5.3
6
6
6
6
6
6
6
Standard R S Link
6 4
6 4
6 4
Section:
6 4
6.6.1
6 4
6 4
6 4
6 4
4
6
Standard R S Link
4 4
4 4
219 / 244
CE1P3977en_02
01.02.2010
Page 219