Diag Object Handler - Siemens Climatix Series Basis Document

Parameter
Par service load
Cycle time actual
Cycle time average
Cycle time min
Cycle time max
MSR failure
MSR failure type
MSR started up
Standard AHU
VVSx Vxxx
yyyy-mm-dd
Name
Street
City
Special settings
Parameter
Parameter
Settings save/restore
Cycle time reset
Reset.
Application info 4
Name
Application info 5
Street
Application info 6
City
Example of text entry
146 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 146
BDCX.100820.01GB
Building Technologies
Range
– 
– Execute
0... [ms]
0... [ms]
0... [ms]
0... [ms]
9. Yes
10. No
13.7.2 Diagnostics Special Settings
Main Index > System overview > All system settings > Diagnostic > Special
settings
Range
– 
– Execute
– 
– Execute
– Press knob to select entry line.
– Turn knob to change the first position.
– Press knob to go to next character.
– Repeat for each character.
Maximum of 19 characters.
– Enter # to finish the entry is the string is less than 19 characters.
Note: No characters allowed after #.
13.8

Diag object handler

Standard application AHU
System settings
Function
Downloads parameter files from commissioning.
– Passive position.
– Download. Display returns to .
Current cycle time for the controller.
Average required cycle time for the controller since the
last controller start or cycle time reset.
Shortest required cycle time for the controller since the
last controller start or cycle time reset.
Longest required cycle time for the controller since the last
controller start or cycle time reset.
Internal software failure.
Internal software failure type (failure number).
Control startup successful.
Application name.
Operating system version used to create the application;
application version.
Application creation date.
z. B. Anlagenname.
E.g. plant address.
E.g. plant address.
Go to Diagnostic special settings page to change the lines:
Name, street and city. (See Diagnostics).
Function
Go to save/restore page.
Reset calculated average, maximum and minimum cycles.
Reset controller.
Text entry for application info 4.
Text entry for application info 5.
Text entry for application info 6.
CE1P3977en_02
01.02.2010