Onboard Web Functionalities - Siemens Climatix Series Basis Document

Prerequisite
Display TCP/IP
parameter
Parameter
IP
Mask
Gateway
DHCP
Name
MAC
Change settings
Parameterization
Parameter
IP
Mask
Gateway
DHCP
Name
100 MBit
Link
Reset required !!
User name
Password
Siemens
Building Technologies
12

Onboard WEB functionalities

The controller POL638.xxx has a WEB Server for a remote server using a standard
web browser.
The following conditions must be met to connect via Ethernet:
– Corresponding mapping file (HMI4WEB) is loaded.
– The controller is connected to the Ethernet.
Main Index > System overview > Communication > TCP/IP
Range
− Active
− Passive
Main Index > System overview > Communication > TCP/IP > Change settings
Range
− Active
− Passive
− Passive
− Active
− Passive
− Active
− 
− Execute
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
Onboard WEB functionalities
Function
Displays controller IP address.
Displays subnet mask.
Displays gateway address.
Displays type of address assignment:
− DHCP server issues addresses.
− IP address is fixed.
Display controller name.
Displays controller MAC address.
Go to page to parameterize onboard TCP/IP set-
tings.
Function
Enter controller IP address if DHCP is set to pas-
sive.
Enter subnet mask.
Enter gateway address.
Displays type of address assignment:
− DHCP server issues addresses.
− IP address is fixed.
Controller name.
Change transmission rate:
− 10 MBit
− 100 MBit
− Keine Verbindung zum Ethernet.
− Verbindung zum Ethernet besteht.
As a matter of principle, the controller must be set
after parameterization to assume the data.
User name for logging onto to WEB HMI.
Password for logging onto to WEB HMI.
139 / 244
CE1P3977en_02
Page 139
01.02.2010