[Al. 0Ec_Overload Warning 2] - Mitsubishi Electric Melservo-J5 MR-J5 Series User Manual

[AL. 0EC_Overload warning 2]

• Operation was repeated with a high load ratio while the servo motor shaft was not rotating.
[AL. 0EC.1_Overload warning 2]
Cause
1.
The load is excessive or the capacity is
insufficient.
1 SERVO AMPLIFIER TROUBLESHOOTING
84
1.3 Handling methods for alarms/warnings
Check/action method
Reduce the load. Otherwise, replace the servo motor with a larger-capacity
servo motor.
Model
[A]
[G]
[WG]