[Al. 1F8_Memory Warning 1] - Mitsubishi Electric Melservo-J5 MR-J5 Series User Manual

Troubleshooting
Hide thumbs Also See for Melservo-J5 MR-J5 Series:
Table of Contents

Advertisement

[AL. 1F8_Memory warning 1]

• There is an error in a memory.
[AL. 1F8.1_Memory writing frequency warning]
Cause
1.
The frequency of writing to the memory
exceeded the guaranteed number.
[AL. 1F8.2_Memory free space warning]
Cause
1.
The available free space in the memory is
insufficient.
Check/action method
Prepare for replacing the servo amplifier, by making a backup of necessary
data, or by other means.
This warning can be disabled by [Pr. PF02.4 Memory writing frequency
warning enable/disable selection]. The memory may be broken if the memory
is used continuously while [Pr. PF02.4] is disabled.
Check/action method
After making a backup of necessary data such as parameters, initialize the
servo amplifier.
Refer to "Servo amplifier setting initialization" in the following manual.
MR-J5-A User's Manual (Introduction)
MR-J5-G/MR-J5W-G User's Manual (Introduction)
This warning can be disabled by [Pr. PF02.5 Memory free space warning
enable/disable selection]. [AL. 119.7 Memory free space error 4-1] may occur
if the memory is used continuously while [Pr. PF02.5] is disabled.
1 SERVO AMPLIFIER TROUBLESHOOTING
1.3 Handling methods for alarms/warnings
1
Model
[A]
[G]
[WG]
Model
[A]
[G]
[WG]
99

Advertisement

Table of Contents
loading

Table of Contents