[Al. 01F_Encoder Initial Communication Error 3] - Mitsubishi Electric Melservo-J5 MR-J5 Series User Manual

[AL. 01F_Encoder initial communication error 3]

• The connected encoder is not compatible with the servo amplifier.
[AL. 01F.1_Incompatible encoder]
Cause
1.
Incompatible servo motor or linear encoder
was connected to the servo amplifier.
2.
The software version of the servo amplifier
does not support the servo motor or linear
encoder.
3.
The encoder is malfunctioning.
Check/action method
Refer to "Specifications" in the following manual.
MR-J5-A User's Manual (Introduction)
MR-J5-G/MR-J5W-G User's Manual (Introduction)
Refer to "Corresponding linear encoder list" in the following manual.
MR-J5 Partner's Encoder User's Manual
Refer to "Corresponding linear encoder list" in the following manual.
MR-J5 Partner's Encoder User's Manual
Replace the servo motor.
1 SERVO AMPLIFIER TROUBLESHOOTING
1.3 Handling methods for alarms/warnings
1
Model
[A]
[G]
[WG]
25