Door Handle Components - Removal And Replacement - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
4.7.8 Door Handle Components – Removal and Replacement
Be sure to check QuickFinder for relevant information, documentation,
and correct part numbers when replacing any of these components.
Figure 180: Typical Door Handle Components
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove the oven door (see Oven Door Removal, Installation,
page 77).
3. Remove the oven trays.
4. Gently place the door on a flat, stable, and non-abrasive surface.
5. Remove and retain the three screws at the top of the door (see
Figure 181).
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Figure 181: Screws at Top of Door
1 Location of screws (3) at top of door
Page 89 of 95