Back Panel Removal And Replacement - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
Figure 133: Backguard, Back Panel, Crossmember Cover
1 Backguard
2 Back panel
3 Crossmember cover
Figure 134: Backguard Installed Inside Guide Channels
1 Backguard (or Island Trim)
2 Guide channels (2)
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
4.6.2

Back Panel Removal and Replacement

Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
Figure 135: Typical Back Panel
1 Screw locations (number varies per panel model)
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove the backguard, per Backguard and Island Trim Removal
and Replacement procedure, page 68.
m
Caution
Be careful not to damage any components at the back of the range
when removing or installing the back panels.
3. Remove and retain the screws from the back panels, and remove
the panel (see Figure 133 on page 69 and Figure 135).
4. Replace the back panel if needed.
Page 69 of 95