Door Gasket Removal And Replacement - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
Figure 190: Inner Panel and Screws
1 Screws (4)
2 Inner panel
Figure 191: Removing the Hinge
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG

4.7.10 Door Gasket Removal and Replacement

Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove oven door (see Oven Door Removal, Installation,
page 77).
3. Remove and retain the screws on the bracket, and then remove
the bracket (see Figure 192, and Figure 193 on page 94).
Figure 192: Bracket
4. Starting from one end of the gasket while carefully working your
way to the other end, gently pull the gasket clips out of the
receptacles on the oven frame. See Figure 194, page 94.
5. After replacing the gasket, check to make sure the door is
positioned correctly, and closes with a tight fit.
6. Re-install the bracket.
Page 93 of 95