Grill Orifice And Elbow Connector Removal And Replacement - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
4.4.6 Grill Orifice and Elbow Connector Removal and
Replacement
16. From inside the burner box, remove and retain the two screws
securing the burner support (which houses the orifice and elbow
connector) onto the front of the burner box (see Figure 65 and
Figure 66), and then remove the burner support (see Figure 67).
Figure 65: Screws for Connecting Piece
1 Screw locations (2) securing the burner support onto
the burner box
Figure 66: Burner Support
1 Portal for orifice
2 Screw holes (2)
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Figure 67: Burner Support Removed with Orifice and Elbow
Connector Attached
1 Elbow connector (shown attached to gas flex line)
2 Burner support
3 Screw hole – for screw from grill burner tab
4 Screw holes (2) – for screws from burner box
5 Orifice
6 Holes on for burner support screws (2)
Figure 68: Elbow Connector
Figure 69: Typical Orifice
Page 37 of 95