Griddle Removal And Replacement; Griddle With Removable Brackets - Removal And Replacement - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:

4.3 Griddle Removal and Replacement

Depending on the model and index number of the range, there are
two different procedures for the griddle removal that are presented
here (the primary differences between them are the brackets used):
Griddle with Removable Brackets – Removal and Replacement, and
Griddle with Fixed Brackets – Removal and Replacement., page 30.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
4.3.1 Griddle with Removable Brackets – Removal and
Replacement
Fiberglass
Wear gloves when handling fiberglass insulation
Figure 37: Element Support Brackets and Screws
1 Screws (2)
2 Element support brackets (1 of 2 shown)
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Griddle Hazard
The griddle plate must always be correctly in place when it is on.
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Complete steps for Accessing Components under the Maintop,
page 21.
3. Remove the griddle plate and grease tray (see Figure 38).
Figure 38: Griddle Plate and Grease Tray
1 Griddle plate
2 Grease tray
4. Remove and retain the two screws from each of the two element
support brackets (see Figure 37).
Page 26 of 95