Door Handle Components - Removal And Replacement; Removing Door Handle Components - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
Gas Leak Testing
With electrical power off, carefully check for gas leaks at each gas
component that was removed, replaced, or otherwise serviced using a
gas leak detector or bubble test.
4.7.8 Door Handle Components – Removal and Replacement
Be sure to check QuickFinder for relevant information, documentation,
and correct part numbers when replacing any of these components.
Figure 228: Door Handle Components
58300000156573_ARA_EN_B
4.7.8.1

Removing Door Handle Components

1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove the oven door (follow all warnings and steps for the Oven
Door Removal, Installation procedure, page 88).
3. Remove the oven trays.
4. Gently place the door on a flat, stable, and non-abrasive surface.
5. Remove and retain the three screws at the top of the door (see
Figure 229).
Figure 229: Screws at Top of Door
1 Location of screws (3) at top of door
Page 113 of 119