Power Cord Replacement; About; Procedure - Precor Experience 700 line Series Service Manual

Power Cord Replacement

About

This procedure provides instruction to replace the power cord.
ID

Procedure

Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and
TIP: For easier access, raise the incline to maximum before removing input power.
Access the service Hardware Validation (51765761) and use the
CROSSRAMP/INCLINE Test to raise the incline and then remove power.
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Power Entry Assembly
Power Cord
ON/OFF SW Circuit Breaker
1
unplug the power cord.
6 Replacement Procedures
Power Cord Replacement
Page 89