Active Status Light (ASL)
(Only applies to machines that support the
About
The Active Status Light (ASL) is a service and maintenance status light that provides a visual
indication of the machine operational status. The current implementation supports four states:
1) Solid blue - indicates normal operation, 2) pulsing blue - indicates preventative maintenance
is required; 3) Solid yellow - indicates an error has occurred but the machine is useable; and 4)
pulsing yellow - indicates a loss of major function was detected.
The console can be used to control the ASL functions including, settings the light brightness
level, viewing the ASL state, resetting the ASL states, enable/disable the maintenance
reminder, and viewing the maintenance due remaining mileage (or hours), see
ASL Light Equipment Location
On treadmills, the Active Status Light (ASL) is a service and maintenance status light located
on the front lower center of the front hood cover.
ASL Overview
An externally visible indicator of the current machine operational status. There are four
l
supported states: 1) solid blue - indicates normal operation, 2) pulsing blue - indicates
preventative maintenance is required; 3) solid yellow - indicates an error has occurred
but the machine is useable; and 4) pulsing yellow - indicates a loss of major function was
detected.
1
Active Status Light: Service and maintenance status light.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
ASL
feature)
7 Troubleshooting
Active Status Light (ASL)
"" on
page 177.
Page 175