Dash Top And Bottom Cover Replacement - Precor Experience 700 line Series Service Manual

Dash Top and Bottom Cover Replacement

Dash Top and Bottom Replacement
ID
Removal Instructions
1. Remove the two #3 Phillips screw fasteners from the dash assy bottom cover
Retain part(s) and/or fastener(s) for installation.
2. Carefully flip the dash top cover
stop switch (E-Stop)
bracket and remove the dash top cover. Retain part(s) and/or fastener(s) for install-
ation.
1
Hand Held Heart Rate
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Dash Top Cover
Dash Bottom Cover
E-Stop Switch Assy
over and remove the four #2 Philips emergency
fasteners. Carefully lay the E-Stop switch on the
6 Replacement Procedures
Covers and Panels Replacement
.
1
HHHR
Page 84
assy