Precor Experience 700 line Series Service Manual page 77

WARNING: Keep hands and appendages clear of the incline platform assembly
before switching power ON. Switching power ON will cause the incline platform to
move to the level "0" Home position.
1. Access the service menu (51765761) and select the INCLINE TEST. Increase the
incline level enough to lift the treadmill frame off the supports.
2. Remove the support stands and clear any other items that might either block the tread-
mill from lowering or may be damaged as it lowers.
3. Lower the incline to level "0".
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
5 Adjustment Procedures
Lift Motor Calibration
Page 68