Programming Data Fields - ADEMCO via30 Installation Instructions Manual

PROGRAMMING DATA FIELDS
ITHECENTERFOLD PROGRAMMING FORM CAN BE USED TO RECORD THE DATA FOR THIS INSTALLATION1
SYSTEM ARMING
('20-'25)
ZONE SOUNDSAND
TIMING
(28-38)
DIALER
PROGRAMMING
(40-50)
*2O
*21
"22
*23
*24
*25
*28
*29
*3O
*38
4O
41
*42
*43
MASTER CODE
Enter 4 digits, O-9 (entry of all 4 is mandatory).
Use of a "9" in the last position inhibits the Ambush feature.
QUICK ARM ENABLE
If
enabled, [#]
key can be used instead of security code when arming the
system.
Enter Ofor disabled or 1 for enabled.
RF SYSTEM TYPE
Select the RF system (receiver) type being used.
O= none; 1 = 5700 (4281); 2 = 5800 (5881)
FORCED BYPASS FUNCTION
All zones that are bypassed by this function will be displayed after the
bypass is initiated.
O= No forced bypass.
1 = Allows automatic bypass of all open zones.
RF RECEIVER HOUSE ID CODE
MUST enter for 5700 system's 4281 type receiver, or 5800 system's
5827 keypad.
Enter 01-31 House ID.
WIRED EXPANSION/OUTPUT RELAY USED
Select expansion/relay unit being used.
O = none; 1 = 4219; 2 = 4229; 3 = 4204
SINGLE ALARM SOUNDING PER ZONE (per armed period)
Enter Ofor no or 1 for yes
FIRE SOUNDER TIMEOUT DISABLE
Enter Oto enable the sounder timeout for fire or 1 to disable it.
ALARM BELL TIMEOUT
External sounder will shut off after time allotted. Enter 1 digit.
O= No timeout
2 = 8 minutes
1 = 4 minutes 3 = 12 minutes
ENTRY DELAY
System will wait the time allotted before sounding alarm upon entering.
(EXIT delay = Entry delay plus 15 seconds)
O= Oseconds
2 = 30 seconds
1 = 20 seconds 3 = 45 seconds
PABX ACCESS CODE
Enter 4 digits, O-9, for each PABX digit needed to access an outside line.
To skip this field, enter . If is entered, no PABX number will be dialed
and nothing will appear in this field. End field by entering 41 if not filled.
To clear entries from field, press "40'.
PRIMARY PHONE
No.
Enter up to
12 digits, O-9. Do not fill unused spaces. End field by
entering 42 if not filled. To clear entries from field, press *41*.
Note: Back-up reporling (8 calls are made to the secondary phone
number if no kiss-off is received after 8 attempts to the primary number) is
automatic only if there is a secondary phone number.
SECONDARY PHONE No.
See field '41 entry info. and Note. End field by entering 43 if not filled.
To clear entries from
field, press 42*.
SUBSCRIBER ACCOUNT. NO.
Enter digits O-9; #+1 l=B; #+12=C; #+13=D; #+14=E; or #+15=F.
Enter as the fourth digit if a 3 digit acct no. (for 3+1 dialer reporting for-
mat) is used. Enter O as the first digit of a 4-digit acct no. for nos. 0000-
0999. End field by pressing (and press next field) if only 3 digits are
used. To clear entries from field, press *43*.
–23-