ADEMCO via30 Installation Instructions Manual page 2

CONGRATULATIONS !
on your purchase of the Ademco via30 System
The purpose of these Installation Instructions is to give you a brief overview of the ~
system, and provide instructions for installing a basic system.
As always, ADEMCO is there for YOU! Our SALES and TECHNICAL SUPPORT staff are eager
to
assist you in any way they can, so don't hesitate to call, for any reason!
East Coast Technical Support: 1-800-645-7492 (8 a.m.-6 p.m. E.S.T.)
West Coast Technical Support: 1-800-458-9469 (8 a.m.-5 p.m. P.S. T.)
Technical Support Fax Number: l-8@447-50t36
PLEASE,
Before you call Technical Support, be sure you have:
s Checked all wiring connections and fuses.
" Determined that the power supply and backup battery are supplying proper voltages.
" Verified your programming information where applicable.
c Noted the proper model number of this product, and the version level (if known)
along with any documentation that came with the product.
" Your Ademco customer number and/or company name.
Having this information handy will make it easier for us to serve you quickly and
effectively.
Again, CONGRATULATIONS, and WELCOME ABOARD!
The Ademco via30
System
Can Support 2 EOLR Wired Zones
and
(when used
with appropriate wireless receiver and/or wired expansion unit)
Up to a Total of 30 Expansion Zones
(Including up to: 30 Wireless, and/or s Additional Wired)
and
(when used with appropriate output relay unit)
2 or 4 Output Relays
FOR YOUR CONVENIENCE,
an easily removable Programming Form
has been included at the center of this manual.
This system is not California State Fire Marshall approved
and, as such, should not be used for fire protection in California
(or other areas requiring such acceptance).
-2-