ADEMCO via30 Installation Instructions Manual page 35

AkNes: After the control and the PC have established valid communication, each
console on the system will become inactive and will display "CC" or "MODEM
COMM.". The control, however, will still be scanning its zones and looking for
alarms. If an alarm does occur, after communication is broken off, alarms are
sounded and the proper dialer reports are sent to the central station. The con-
soles will become active after the download communication is terminated. The
detailed operation of the download functions is covered in the installation in-
structions for the 4130PC Downloading Software Diskette.
Remote Programming . Alarm and trouble reporting may be delayed during the time that the system
Advisory Notes and the Downloader are linked to each other following a valid exchange of
codes, but the proper message will get through to the Central Station after the
link is broken.
Keypad entries are ignored during the time interval stated above.
. A copy of the program downloaded may be produced from the IBM PC
compatible computer, using the product's internal report generator, when an
optional printer is connected (consult your PC manual for proper printer and
connections).
. Program Upload Time-One minute fifteen seconds for a complete program.
. Program Download Time-Depends on changes. Average time, one minute.
-35-