Daikin VRV Plus Series General Information Manual page 89

Si33-003.book Page 85 Monday, June 25, 2001 9:06 AM
SiE33-003
BRC7C Type
1. When in the normal mode, push
2. Set mode No. "00" with
3. Set the group No. for each group with
4. Enter the selected group numbers by pushing
5. Push
BRC7C Type
Group No. Setting
Example
Indoor/Outdoor Outdoor/Outdoor
F1 F2
F1 F2
F1 F2 P1 P2
Caution When turning the power supply on, the unit may ofen not accept any operation while "88" is displaying after
all indications were displayed once for about 1 minute on the liquid crystal display.
This is not an operative fault.
General Information
Group No. setting by infrared remote control for centralized control
"field set mode."
button.
button and return to the normal mode.
Indoor/Outdoor Outdoor/Outdoor
F1 F2
P1 P2 F1 F2 P1 P2
RC
RC RC
Main
1-00
1-01
F1 F2 P1 P2
No Remote Control
RC
1-03
1-04
If you have to set the address for each unit for calculating cost, etc., set the mode No. to "30."
button for 4 seconds or more, and operation then enters the
button (advance/backward).
button.
F1 F2 F1 F2
F1 F2 P1 P2 F1 F2 P1 P2
Group Control by Remote Contol
RC
Sub
(autmatic unit address)
1-02
F1 F2 P1 P2 F1 F2 P1 P2
: http://splitoff.ru/tehn-doc.html
Test Operation
Central Remote
Control
F1 F2
(V0917)
85