Daikin VRV Plus Series General Information Manual page 143

Si33-003.book Page 139 Monday, June 25, 2001 9:06 AM
SiE33-003
3. Bottom Connection
Installation Manual
Piping kit "KHF30A30U" is required for RSXYP24,26,28 and 30.
For RSXYP16,18 and 24, bend the liquid side pipe as below and connect it to the stop valve.
±175mm
1
3 ±115mm
2
±160mm
RSXYP16,18,20
Bend the gas side pipe as below.
84mm
(V0899)
Connect with attached pipes.
1. Cut the attached pipe
1
(V0900)
80mm
2. Connect attached pipes and field pipe
(V0901)
RSXYP24,26,28,30
The diagram at right shows the opening on the underside for connecting the bottom. Note that piping
connected with elbow-pipes (procured locally) cannot pass through the opening.
1
2
3
1. Bending position
2. Cutting position in case of using elbow
3. Liquid side
Fig. 8
(V0856)
1. Cutting position
1. Knock out hole
2. Aprx. 110mm
3. Aprx. 54mm
Fig. 9
(V0857)
: http://splitoff.ru/tehn-doc.html
Refrigerant Piping
139