Daikin VRV Plus Series General Information Manual page 66

Si33-003.book Page 62 Monday, June 25, 2001 9:06 AM
Test Operation
Mode Changing Procedure
Press the MODE button.
3 Monitor mode
Select check items with
the operation button.
Contents displayed
Note: 1. If you become unsure of how to proceed, push the MODE button (BS1) and return to setting mode 1.
2. Power reset is not necessory after setting of setting mode 1 (including C/H select SS1) and setting
62
1 Setting mode 1
(initial status)
Select cool/heat run
Set
with the operation button.
Note. 1
Press the
RETURN button.
Select low-noise run with
the operation button.
Press the
RETURN button.
Select sequential start
with the operation button.
Press the MODE
button.
mode 2.
Set
: Use the SET button to make settings.
Hold down the MODE
button for 5 seconds.
Press the
2 Setting mode 2
SET button.
Select items with the
Set
operation button.
Press the
RETURN button.
Select setting items
Set
with the operation button.
Press the
RETURN button.
Set Contents displayed
Press the
RETURN button.
: http://splitoff.ru/tehn-doc.html
SiE33-003
Set
Press the
RETURN button.
Set
Press the
RETURN button.
Press the
RETURN button.
Press the
MODE button.
(V1329)
General Information