Table of Contents
Advertisement
Procedure 57
Performing a software upgrade through FTP
Step
Action
1
Place the new software load file on an FTP server that is
accessible from the E1/T1 card. This file must be a zip file, for
example, upgrade_v1_1_1.zip..
2
On the Home - System Overview window, click Upgrades >
Upgrade the Software. See
window" (page
Figure 40
Upgrade the Software window
3
Select FTP Server.
4
Type the details into the IP Address, File name (including
path), Login, and Password fields.
5
Click Get Files.
6
To complete the installation of the software, click Upgrade &
Restart.
The E1/T1 card installs the new software and restarts the
system. Because the system restarts, your Web session ends.
You must log on again to resume working through the Web
interface.
7
If the upgrade fails, or if you want to check the status of the
upgrade, check the details on the View Last Upgrade Details
window. For more information, see
(page
140).
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Figure 40 "Upgrade the Software
139).
"Check software upgrades"
--End--
Upgrades 139
Advertisement
Table of Contents
