Table of Contents
Advertisement
60 Install an E1/T1 card and daughterboards
Figure 10
Expansion daughterboard positioning
Install an E1/T1 card
The E1/T1 card serves four to eight spans and is a motherboard to
the NTBK51AA/NTBK51CA downloadable D-channel handler and the
NTAK93AB D-channel handler.
The E1/T1 card requires the lower slot on the 19-inch 2u PRI Gateway
chassis. The upper slot on the chassis is reserved for the Media Gateway
Controller.
See
(page
PRI Gateway components" (page
Procedure 7
Installing an E1/T1 card on a PRI Gateway chassis
Step
1
2
Media Gateway 1000E PRI Gateway Installation and Commissioning
Procedure 7 "Installing an E1/T1 card on a PRI Gateway chassis"
60). For information about the connectors and cables, see
Action
Determine the location of the shelf where you are installing the
E1/T1 card.
Unpack and inspect the E1/T1 card and DCH daughterboards.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
63).
"Connect
Advertisement
Table of Contents
