Table of Contents
Advertisement
132 Maintenance and diagnostics
Maintain DPNSS/DASS and DCHI
Table 38 "DPNSS and DASS trunk maintenance commands (LD 75)"
(page 132)
loop and DCHI (D-channel) maintenance. See
DPNSS and DASS trunks using LD 75" (page
Procedure 53
Maintaining DPNSS and DASS trunks using LD 75
Step
1
2
3
Table 38
DPNSS and DASS trunk maintenance commands (LD 75)
Command
ENL DDSL n
ENL DDCS l
ENL DTRC l c
DIS DDSL n
DIS DDCS l
DISI DDCS l
DIS DTRC l c
STAT DDSL
STAT DDSL n
STAT DDCS
STAT DDCS l
STAT DTRC l c
STRT n
Media Gateway 1000E PRI Gateway Installation and Commissioning
lists the basic commands supported for DPNSS/DASS (IDA)
Action
Log on to the CS 1000E.
To access LD 75, enter:
LD 75
Enter the commands shown in
trunk maintenance commands (LD 75)" (page
Description
Enable DCHI port n.
Enable PRI loop l.
Enable real channel (loop, channel).
Disable DCHI, port n.
Disable PRI loop n.
Disable all channels, loop l as they become idle.
Disable real digital channel (loop, channel).
Give status of entire DCHI.
Give status of DCHI port n.
Give status of all PRI loops.
Give status of PRI loop l and a count of the number of channels in each
state.
Give status of real digital channel (loop, channel).
Start DCHI, port n.
The message OK STARTING appears and you can enter more
commands.
The message DTM301 appears when the link starts successfully.
Nortel Communication Server 1000
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
Procedure 53 "Maintaining
132).
Table 38 "DPNSS and DASS
132).
--End--
Advertisement
Table of Contents
