Replacing Motor Swing Arm - Invacare Storm4 Series Service Manual

Removing Lever Unit
1. Loosen screw of clutch lever.
2. Remove clutch lever.
3. Loosen and remove four screws F and washers G of
lever unit E.
4. Remove lever unit E from fixation bracket B.
Removing Fixation Bracket of Lever Unit
1. Remove lever unit.
2. Loosen and remove screws including washers and nut
D underneath seat frame. Screw A is screwed into nut
D. The other screw is screwed into one of retaining
sheets H.
3. Pull fixation bracket B out of seat frame.
Installing Components
1. Replace defective components.
2. Install parts in reverse order.
3. Adjust clutch by loosening counter nut (1) and turning
the adjustment nuts (2) on lever unit.
4. Test all functions.

6.7.4 Replacing Motor Swing Arm

This chapter refers to Storm
CAUTION!
Risk of Crushing to Hands and Feet by Weight of Mobility Device
– Pay attention to hand and feet.
– Use proper lifting techniques.
1555830-C
4 , Storm 4 X-plore and Storm 4 Max.
Fig. 6-12
Fig. 6-13
Fig. 6-14
Service
27