Invacare Storm4 Series Service Manual page 60

Invacare® Storm⁴ Series
Replacing Clothes-Guard
• 4 mm Allen key
• Phillips screwdriver, size 2
1. Loosen and remove screws A, saddle washers C and
clothes-guard B.
2. Replace clothes-guard B.
When installing, ensure that saddle washer C is in
the correct position.
3. Install parts in reverse order.
4. Test all functions.
Replacing Armrest Bracket
• 4 mm Allen key
• 6 mm Allen key
1. Remove upper armrest assembly.
2. Loosen lever D and remove connection pin E.
3. Loosen screws B.
4. Remove clamp C from armrest bracket A.
5. If necessary, loosen two screws under seat frame and
remove armrest bracket A.
6. Install parts in reverse order.
7. Test all functions.
60
Fig. 6-69
Fig. 6-70
1555830-C