Table of Contents
Advertisement
66
Seats and stowage
Adjusting armrests
Example image
To set the armrest inclination: fold the arm‐
#
rest more than 45 ° upwards 2.
The armrest is released.
Fold the armrest forwards
#
go.
Slowly fold the armrest upwards into the
#
required position.
To fold the armrest upwards: if necessary,
#
fold the armrest more than 90 ° upwards 1.
Folding the folding seat up or down
& WARNING Risk of injury when using the
folding seat due to inserted key
When the key is in the lock of the partition
sliding door, it can come into contact with the
person on the folding seat.
Always remove the key from the parti‐
#
tion sliding door before a person sits on
the folding seat.
#
#
#
3
as far as it will
#
Installing and removing the rear bench seat
& WARNING Risk of injury if rear bench
If you do not install the rear bench seat as
described, or install an unsuitable rear bench
seat, the seat belts may not provide the inten‐
ded protection.
#
#
#
& WARNING Risk of injury if the rear bench
If the locking mechanisms on the rear bench
seat legs are not correctly engaged, the rear
bench seat will not be held firmly and could
roll over during travel.
#
Remove key
1
from the partition sliding
door.
Press the push button on catch
seat cushion
3
up or down.
Release push button on catch
cushion
3
reaches its end position.
Move seat cushion
3
until it has locked. The
push button on catch
2
must be completely
flush with the seat frame.
seat is installed incorrectly
Install the rear bench seat as described
and only in the direction of travel.
Installing the rear bench seat in the
opposite direction is not permitted.
Use only rear bench seats approved for
your vehicle by Mercedes-Benz.
seat is not locked in place
Ensure that the rear bench seat is
engaged before setting off. There must
2
and fold
2
when seat
Hide quick links:
Advertisement
Table of Contents
