Declarations Of Conformity; Diagnostics Connection - Mercedes-Benz Sprinter 2019 Operating Instructions Manual

Hide thumbs Also See for Sprinter 2019:
Table of Contents

Advertisement

22
General notes
tires could be damaged without the damage
being visible. Components damaged in this
way can unexpectedly fail or, in the case of an
accident, may not absorb the loads that arise
as intended.
If the underbody paneling is damaged, flam‐
mable materials such as leaves, grass or
twigs can collect between the underbody and
the underbody paneling. These materials may
ignite if they come into contact with hot parts
on the exhaust system.
Have the vehicle checked and repaired
#
immediately at a qualified specialist
workshop.
or
If driving safety is impaired while con‐
#
tinuing your journey, pull over and stop
the vehicle immediately in accordance
with the traffic conditions, and contact
a qualified specialist workshop.

Declarations of conformity

Information about the declaration of conform‐
ity for wireless vehicle components
USA: "The wireless devices of this vehicle comply
with Part 15 of the FCC Rules. Operation is sub‐
ject to the following two conditions: 1) These
devices may not cause harmful interference, and
2) These devices must accept any interference
received, including interference that may cause
undesired operation. Changes or modifications
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment."
Canada: "The wireless devices of this vehicle
comply with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following
two conditions: (1) These devices may not cause
interference, and (2) These devices must accept
any interference, including interference that may
cause undesired operation of the device."
USA: "Wireless charging system for mobile devi‐
ces (model: WMI2 Wireless Mobile Interface): this
device complies with Part 18 of the FCC Rules."
The name and address of the responsible party
is:
peiker acustic GmbH
Max-Planck-Str. 28-32
61381 Friedrichsdorf
Germany

Diagnostics connection

The diagnostics connection is only intended for
the connection of diagnostic devices at a quali‐
fied specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect equipment to a diagnostics
connection in the vehicle, it may affect the
operation of vehicle systems.
As a result, the operating safety of the vehicle
could be affected.
Only connect equipment to a diagnos‐
#
tics connection in the vehicle which is
approved for your vehicle by Mercedes-
Benz.
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always install the floor mats securely
#
and as prescribed in order to ensure
that there is always sufficient room for
the pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
* NOTE Battery discharging from using
devices connected to the diagnostics
connection
Using devices at the diagnostics connection
drains the battery.
Check the charge level of the battery.
#
If the charge level is low, charge the bat‐
#
tery, e.g. by driving a considerable dis‐
tance.
Connecting equipment to the diagnostics connec‐
tion can lead to emissions monitoring information
being reset, for example. This may lead to the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents