Table of Contents
Advertisement
248 Display messages and warning and indicator lamps
Display messages
Introduction
Function of display messages
The display messages appear on the multifunc‐
tion display.
The display messages with graphic displays can
be displayed in simplified format in the Operating
Instructions and may deviate from the display on
the multifunction display. The multifunction dis‐
play shows high-priority display messages in red.
In addition, a warning tone sounds for specific
display messages.
Act in accordance with the display messages and
comply with the additional instructions in this
Operating Instructions.
In addition, symbols are shown for some display
messages:
¤ Further information
R
O Hiding display messages
R
You can use the left-hand Touch Control to select
between the symbols by swiping to the left or
right. Pressing ¤ displays further information
Safety systems
Display messages
6
Front Left Malfunction
Service Required
(exam‐
ple)
6
SRS Malfunction Service
Required
on the multifunction display. Pressing O hides
the display message.
You can hide low-priority display messages by
pressing the ¤ button or with the left-hand
Touch Control. The display messages are saved in
the message memory.
Rectify the cause of a display message as quickly
as possible.
You cannot hide high-priority display messages.
The multifunction display shows these display
messages permanently until the cause of the dis‐
play message has been rectified.
Calling up saved display messages
On-board computer:
,
If there are no display messages,
appears on the multifunction display.
#
#
Possible causes/consequences and
* The restraint system in question is malfunctioning .
& WARNING Risk of injury or fatal injury due to a malfunction
in the restraint system
If the restraint system is malfunctioning, restraint system com‐
ponents may be triggered unintentionally or might not be trig‐
gered at all in the event of an accident. This may affect the
Emergency Tensioning Device or airbag, for example.
Have the restraint system checked and repaired immedi‐
#
ately at a qualified specialist workshop.
Detection of a malfunction in the restraint system
The 6 restraint system warning lamp does not light up when
R
the ignition is switched on.
The 6 restraint system warning lamp lights up continuously
R
or repeatedly during a journey.
Visit a qualified specialist workshop immediately.
#
* The restraint system is malfunctioning .
Service
1 Message
.
Browse through the display messages by
swiping upwards or downwards on left-hand
Touch Control.
Exiting the message memory: press the
% button.
M M
Solutions
No Messages
Hide quick links:
Advertisement
Table of Contents
