Mercedes-Benz Sprinter 2019 Operating Instructions Manual page 51

To unlock: pull locking pin
#
ually or use the central locking button to
unlock the sliding door (
Press button 1 or pull outside handle 3.
#
The sliding door opens or closes.
Press button 1 again or pull outside handle
#
3.
The sliding door stops moving.
Unlocking the electric sliding door manually
If there has been a malfunction or if the battery
has been disconnected, you can use release
catch 2 to disconnect the sliding door from the
electric motor. Then, you can open or close the
door manually.
Vehicles with complete sliding door trim:
#
remove the cover from release catch 2.
Service operation is accessible.
#
#
#
#
#
#
2 upwards man‐
If it is not possible to rectify the malfunction:
→ page 44).
#
Resetting the electric sliding door
Sliding door buttons on the center console
Sliding door button on the door sill (B-pillar)
You must reset the sliding door if there has been
a malfunction or a voltage supply interruption.
Opening and closing
To disconnect the sliding door from the
electric motor: turn release catch
clockwise.
The "MAN" position is set.
To unlock: pull locking pin 3
ually or use the central locking button to
unlock the sliding door ( page 44).
→
Press button 1.
Open or close the sliding door with the out‐
side/inside door handle.
To connect the sliding door to the electric
motor: turn release catch 2
clockwise.
The "AUTO" position is set.
Reset the sliding door ( → page 49).
Visit a qualified specialist workshop.
49
2 180°
upwards man‐
180° counter-