Rotary Axes (R2); Signals To Axis/Spindle (Db31; Signals From Axis/Spindle (Db31 - Siemens SINUMERIK Series Function Manual

Z2: NC/PLC interface signals

18.12 Rotary axes (R2)

18.12 Rotary axes (R2)
18.12.1

Signals to axis/spindle (DB31, ...)

DB31, ...
DBX12.4 Traversing range limitation for modulo rotary axes
Edge evaluation: No
Signal state 1 or Activate traversing range limitation for modulo rotary axes
edge change 0 → 1 (software end switches, work field limitations).
Signal state 0 or Deactivate traversing range limitation for modulo rotary axes.
edge change 1 → 0
Signal irrelevant for Linear axes / rotary axes without modulo functionality.
...
Application Built-on rotary axis with monitoring
example(s)
18.12.2

Signals from axis/spindle (DB31, ...)

DB31, ...
DBX74.4 Monitoring status with modulo rotary axes
Edge evaluation: No
Signal state 1 or Traversing range limitation for modulo rotary axes active
edge change 0 → 1 (software end switches, work field limitations).
Signal state 0 or Traversing range limitation for modulo rotary axes not active.
edge change 1 → 0
Signal irrelevant for Linear axes / rotary axes without modulo functionality.
...
Application Built-on rotary axis with monitoring
example(s)
902
Signal(s) updated: Cyclic
Signal(s) updated: Cyclic
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions