Siemens SINUMERIK Series Function Manual page 386

M1: Kinematic transformation
6.4 TRAANG oblique angle transformation (option)
Programming
Figure 6-14
Example:
Program code
N...
N50 G07 X70 Z40 F4000
N60 G05 X70 F100
N...
Supplementary conditions
● It is only meaningful to select the function "Cartesian PTP travel" in JOG mode (motion
●
● The working area limitation is monitored in JOG mode with active "PTP travel". The axis
See also
Cartesian PTP travel (Page 398)
386
Machine with inclined infeed axis
according to G05) if a transformation is active (
$MC_TRAFO_RESET_VALUE.
offsets must be traversed back in JOG mode in the Cartesian coordinates while
REPOS
"PTP travel" is not active.
is braked before overrunning the working area limitation. If "PTP travel" is not active, the
axis can be traversed right up to the operating range limit.
Comment
; Program axis for inclined axis
; Approach starting position
; Oblique plunge-cutting
). Note the value set in MD20140
TRAANG
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions