Siemens SINUMERIK Series Function Manual page 788

T1: Indexing axes
15.6 Starting up indexing axes
Figure 15-3
The indexing positions for the tool turret are entered in indexing position table 1.
MD10910 $MN_INDEX_AX_POS_TAB_1[0] = 0
MD10910 $MN_INDEX_AX_POS_TAB_1[1] = 45
MD10910 $MN_INDEX_AX_POS_TAB_1[2] = 90
MD10910 $MN_INDEX_AX_POS_TAB_1[3] = 135
MD10910 $MN_INDEX_AX_POS_TAB_1[4] = 180
MD10910 $MN_INDEX_AX_POS_TAB_1[5] = 225
MD10910 $MN_INDEX_AX_POS_TAB_1[6] = 270
MD10910 $MN_INDEX_AX_POS_TAB_1[7] = 315
Other machine data:
MD10900 $MN_INDEX_AX_LENGTH_POS_TAB_1= 8
MD30500 $MA_INDEX_AX_ASSIGN_POS_TAB [AX5] = 1
MD30300 $MA_IS_ROT_AX [AX5] = 1
MD30310 $MA_ ROT_IS_MODULO [AX5] = 1
788
Example: Tool turret with 8 locations
; 1. indexing position at 0°
; 2. Indexing position at 45°
; 3. Indexing position at 90°
; 4. Indexing position at 135°
; 5. Indexing position at 180°
; 6. Indexing position at 225°
; 7. Indexing position at 270°
; 8. Indexing position at 315°
; 8 indexing positions in table
1
;; Axis 5 is defined as
indexing axis
Indexing positions in table 1
; Axis 5 is rotary axis
; Modulo conversion is
activated
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions