Siemens SIMATIC ET 200pro Quick Manual page 23

Component
Crimping ... serve to secure the bushing and pin con-
tools tacts at the ends of the cables.
... are available for 0.14 - 4 mm
6 mm
Dismounting ... are used to dismount the contacts from
tools the plug cases.
... are available for HAN Q4/2 and
HAN Q8/0.
M12 sealing ... serves to cover the inputs that are not
cap with O- required.
ring
PC cable with ... with optical interface for communication
RS232 with motor starters
Software ... for:
motor starter • Parameter assignment
ES on CD- • Operation and observation
ROM • Diagnostics
• Monitoring during operation
• Output of statistical data for preventive
maintenance, e.g. hours of operation
(see
Table 1-4: Accessories (cont.)
SIMATIC - ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
Function
2
.
Chapter 4.7).
2
and 4 -
Drawing
1-5