Table of Contents
Advertisement
• DPL
•
DSCP
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.9.11 QoS Control List
This page shows the QoS Control List(QCL), which is made up of the QCEs. Each row describes a QCE that is defined. The
maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list. The QoS Control List screen in
The page includes the following fields:
Object
•
QCE#
• Port
• DMAC
• SMAC
to followed parameters.
Actual Drop Precedence Level.
Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS
Class and DPL value
Figure 4-9-12: QoS Control List Configuration page Screenshot
Description
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Specify the type of Destination MAC addresses for incoming frame. Possible
values are:
■
Any: All types of Destination MAC addresses are allowed.
■
Unicast: Only Unicast MAC addresses are allowed.
■
Multicast: Only Multicast MAC addresses are allowed.
■
Broadcast: Only Broadcast MAC addresses are allowed.
The default value is 'Any'.
Displays the OUI field of Source MAC address, i.e. first three octet (byte) of MAC
address.
User's Manual of SGS-5220 Series
197
Figure 4-9-12
appears.
Advertisement
Table of Contents
