Show Snmp Community V3; Show Snmp Host - Planet Networking & Communication MGSW-28240F Command Manual

Security Model
Security Level
Read View Name
Write View Name : default_view

4.21.96 show snmp community v3

Command:
show snmp community v3 [ <community> ]
show Show running system information
snmp Display SNMP configurations
community Community
v3 SNMPv3
<Community : word127>
Default:
N/A
Usage Guide:
To display the SNMPv3 Community information.
Example:
To display the SNMPv3 Community information
Switch # show snmp community v3
Community
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community
Source IP : 0.0.0.0
Source Mask : 0.0.0.0

4.21.97 show snmp host

Command:
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show Show running system information
: any
: NoAuth, NoPriv
: default_view
Specify community name
: public
: private
Command Guide of MGSW-28240F
-417-