Mld Snooping Configuration - Planet Networking & Communication SGS-5220 User Manual

4.8.10 MLD Snooping Configuration

This page provides MLD Snooping related configuration. The MLD Snooping Configuration screen in
The page includes the following fields:
Object
•
Snooping Enabled
•
Unregistered IPMCv6
Flooding enabled
• MLD SSM Range
• Leave Proxy Enable
• Proxy Enable
• Router Port
Figure 4-8-13: MLD Snooping Configuration page Screenshot
Description
Enable the Global MLD Snooping.
Enable unregistered IPMCv6 traffic flooding.
The flooding control takes effect only when MLD Snooping is enabled.
When MLD Snooping is disabled, unregistered IPMCv6 traffic flooding is always
active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range.
Enable MLD Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or MLD querier.
User's Manual of SGS-5220 Series
169
Figure 4-8-13 appears.