Kia 2020 Telluride Owner's Manual page 62

Hide thumbs Also See for 2020 Telluride:
Table of Contents

Advertisement

Safety features of your vehicle
WARNING
To obtain maximum benefit from a
pre-tensioner seat belt:
1. The seatbelt must be working
correctly and adjusted to the
proper position. Please read and
follow all of the important infor-
mation and precautions about
your vehicle's occupant safety
features including seat belts and
air bags that are provided in this
manual.
2. Be sure you and your passengers
always wear seat belts properly.
NOTICE
When the pre-tensioner seat
belts are activated, a loud noise
may be heard and fine dust, which
may appear to be smoke, may be
visible in the passenger compart-
ment. These are normal operating
conditions and are not hazardous.
Although it is harmless, the fine
dust may cause skin irritation and
should not be breathed for pro-
longed periods. Wash all exposed
skin areas thoroughly after an
accident in which the pre-ten-
sioner seat belts were activated.
Because the sensor that activates
the SRS air bag is connected with
the pre-tensioner seat belt, the
SRS air bag warning light on the
instrument panel will illuminate
for approximately 6 seconds after
3
38
the ENGINE START/STOP button
has been turned to the "ON" posi-
tion, and then it should turn off.
CAUTION
If the pre-tensioner seat belt is not
working properly, the SRS air bag
warning light will illuminate even if
there is no malfunction of the SRS
air bag. If the SRS air bag warning
light does not illuminate when the
ENGINE START/STOP button is
turned to ON, or if it remains illumi-
nated after illuminating for approxi-
mately 6 seconds, or if it illuminates
while the vehicle is being driven,
have the system inspected by an
authorized Kia dealer.
WARNING
Pre-tensioners seat belts sys-
tems are designed to operate
only one time. After activation,
pre-tensioner seat belts must be
replaced. All seat belts, of any
type, should always be replaced
after they have been worn during
a collision.
The pre-tensioner seat belt
assembly mechanisms become
hot during activation. Do not
touch the pre-tensioner seat belt
assemblies for several minutes
after they have been activated.
Seat belts

Advertisement

Table of Contents
loading

Table of Contents