Kia 2020 Telluride Owner's Manual page 157

Features of your vehicle
The mirror indicator light will illu-
minate.
Press the O button (2) to turn the
automatic- dimming function off.
The mirror indicator light will turn
off.
HomeLink Wireless Control sys
tem
OON048400NR
1. Homelink buttons
2. Indicator light
3. Glare detection sensor
Your new mirror comes with an
integrated HomeLink Universal
Transceiver, which allows you to
program the mirror to activate your
garage door(s), estate gate, home
lighting, etc. The mirror actually
learns the codes from your various
existing transmitters.
Retain the original transmitter for
future programming procedures
(i.e., new vehicle purchase). It is also
suggested that upon the sale of the
vehicle, the programmed HomeLink
buttons be erased for security pur-
poses (follow step 1 in "Program-
ming HomeLink" on page 4-57).
Programming HomeLink
Your vehicle may require the
ENGINE START/STOP button to be
turned to the ACC position for pro-
-
gramming and/or operation of
HomeLink. It is also recommended
that a new battery be replaced in
the hand-held transmitter of the
device being programmed to Home-
Link for quicker training and accu-
rate transmission of the
radiofrequency.
Follow these steps to train your
HomeLink mirror:
1. When programming the buttons
for the first time, press and hold
the left and center buttons (
) simultaneously until the indi-
cator light begins to flash after
approximately 20 seconds. (This
procedure erases the factory-set
default codes. Do not perform
this step when programming the
additional HomeLink buttons.)
Mirrors
4
,
4 57