Kia 2020 Telluride Owner's Manual page 365

Driving your vehicle
The Smart Cruise Control system
cannot recognize a stopped vehi-
cle, pedestrians or an oncoming
vehicle.
Always look ahead cautiously to
prevent unexpected and sudden
situations from occurring.
Vehicles moving in front of you
with a frequent lane change may
cause a delay in the system's
reaction or may cause the system
to react to a vehicle actually in an
adjacent lane.
Always drive cautiously to prevent
unexpected and sudden situations
from occurring.
Always be aware of the selected
speed and vehicle to vehicle dis-
tance. The driver should not solely
rely on the system but always
pay attention to driving condi-
tions and control your vehicle
speed.
The Smart Cruise Control system
may not recognize complex driv-
ing situations so always pay
attention to driving conditions
and control your vehicle speed.
For safe operation, carefully read
and follow the instructions in this
manual before use.
Do not use Smart Cruise Control
system on steep inclines or when
towing another vehicle or trailer
since such extreme loading can
interfere with your vehicle's abil-
ity to maintain the selected
speed.
Smart Cruise Control (SCC) with Stop & Go
Do not use Smart Cruise Control
when the vehicle is towed.
NOTICE
The Smart Cruise Control system
may not operate temporarily due
to:
Electrical interference.
A modified suspension.
Differences of tire abrasion or tire
pressure.
Installing different type of tires.
This device complies with Part 15
of the FCC rules.
Operation is subject to the following
three conditions:
1. This device may not cause harm-
ful interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
3. Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to oper-
ate the device.
system
5
5 87