Kia 2020 Telluride Owner's Manual page 37

Safety features of your vehicle
By saving the desired position into
the system memory, different driv-
ers can reposition the driver seat
based upon their driving prefer-
ence. If the battery is disconnected,
the desired seat position memory
will need to be re-saved.
WARNING
Driver position memory system
Never attempt to operate the driver
position memory system while the
vehicle is moving.
This could result in loss of control,
and an accident causing death or
serious injury.
CAUTION
The driver position memory system
requires a large amount of electric
power.
Refrain from using the system
when the engine is stopped to pre-
vent battery discharge.
Storing driver's seat positions
1. Place the Engine Strat/Stop but-
ton is ON while the vehicle stop.
2. Adjust the driver's seat and out-
side rearview mirror comfortable
for the driver.
3. Press SET button on the control
panel. The system will beep once.
4. Press one of the memory buttons
(1 or 2) within 4 seconds after
pressing the SET button. The sys-
tem will beep twice when mem-
ory has been successfully stored.
When recalling an adjustment mem-
ory button while sitting in the vehi-
cle, you can be surprised by the
setting chosen if the memory has
been adjusted by someone else. If
that occurs, immediately push the
seat position control switch in the
direction of the desired position to
stop further undesired movement.
Recalling positions from memory
Operate the following steps while
the vehicle is stopped:
To recall a position already stored
in the memory, press the desired
memory button (1 or 2). The sys-
tem will beep once, then the
driver's seat will automatically
adjust to the stored position.
If you adjust the control switch for
the driver's seat while the system is
recalling the stored position, the
seat will stop and then move in the
direction that the control switch is
moved.
Setting the easy access function (if
equipped)
The driver position memory system
will move the driver's seat automat-
ically as follows:
The driver can turn off or set the
driver's seat settings in the user
Seat
3
3 13