Table of Contents
Advertisement
Features of your vehicle
If the light switch is pulled
towards you when the high beam
is turned on using the HBA, the
low beam will turn on and the HBA
turn off.
If the light switch is turned to the
headlamp position (
AUTO position, the HBA will turn
off and the low beam will be on
continuously.
When the HBA is operating, the high
beam switches to low beam in the
following conditions.
When the headlamp is detected
from the on-coming vehicle.
When the tail lamp is detected
from the front vehicle.
When headlamp / tail lamp of
bicycle/motorcycle is detected.
When the surrounding is so bright
that high beams are not needed.
When streetlights or other lights
are detected.
When the light switch is not in the
AUTO position.
When the HBA is off.
When vehicle speed is below 15
mph (24 km/h).
HBA warning light and message
When the HBA is not working prop-
erly, a warning message "Check High
Beam Assist (HBA) system" will
come on for a few seconds.
After the message disappears, the
master warning light (
minate. Take your vehicle to an
authorized Kia dealer and have the
system checked.
CAUTION
The High Beam Assist system may
) from
not work properly in the following
situations:
When the light from a on-coming
or front vehicle is poor
- When the light from a on-com-
- When the lamp of a on-coming
- When a front vehicle's head-
When external conditions inter-
vene
- When there is a lamp that has a
- When the headlamp is not
- When headlamp aiming is not
- When driving on a narrow
- When only part of the vehicle in
) will illu-
ing or front vehicle is not
detected because of lamp dam-
age, or because it is hidden
from sight, etc.
or front vehicle is covered with
dust, snow or water.
lamps are off but the fog lamps
on and etc.
similar shape as a front vehi-
cle's lamps.
repaired or replaced at an
authorized Kia dealer.
properly adjusted.
curved road, rough road, down-
hill or uphill.
front is visible on a crossroad or
curved road.
Lighting
4
4
115
Advertisement
Chapters
Table of Contents
